602.269.3555
 
  602.278.5220
Follow Us On -  
Subscribe now
Home   |    About Us  |    Contact Us  
  Quicklinks    
Material Home    
  Granite    
  Engineered Stone    
  Solid Surface    
  Marble    
  Limestone / Travertine    
  Recycled Glass & Cement    
       
 
Marble    
Selecting Marble takes care and knowledge of what to look for. The following information is intended to enlighten the novice as well as the experienced person as to what to look for when physically selecting marble slabs for your project.

1   Of all of the materials used for countertops, marble has a range of pricing. It can range from the very inexpensive to expensive. As cost is always a primary consideration, knowing what the marble cost, or what price group it is in, could save time in the selection process.

     
2   As marble is quarried stone created by nature, it inherently has many flaws and defects. The quarries will patch, fill, reinforce the back of the slab, and make other cosmetic enhancements in order to avoid scraping slabs. Thus, carefully and thoroughly, visually inspect each slab. Look for repairs, cracks, voids, fissures, and other imperfections. If these material imperfections are in the center of the stone, it will become part of the countertop. If they are on the edges of the slab, it may or may not be eliminated from the countertop. Will these imperfections be acceptable? If not, DO NOT select the slab.

3   After completing the visual inspection, run your fingers over the marble's surface. Your touch will uncover flaws that your eye missed.

4  Finally look at the back of the slab. If there is a mesh adhered to the back of the slab, the material is more prone to cracking and breaking. The mesh is a red flag to look for quarry made repairs to cracks, voids, and fissures in the stone. Even without the mesh backing, inspect closely for quarry made repairs and for un-repaired cracks, voids, and fissures in the stone.

5  Does the marble being selected have dramatic color variations and/or veining throughout the slab? If so, seams in the fabricated countertop will be more apparent due to the color and/or grain shift from section to section. In order to minimize the apparent discontinuity, bookmarked slabs should be selected. That is, the slabs are quarried from the same stone block and are taken from the block in consecutive order. Bookmarking generally creates more waist from slabs as the color and pattern matching are more important than yield.

6  To assure consistency in the marble slabs, Rembrandt conducts this extensive and rigorous inspection process when material is received from the distributor.

 
 
  © 2011 All Rights Reserved. A